Pages
Tuesday, March 11, 2014
[Rant] Had to clean up the internals of the PC
Thursday, February 20, 2014
[Rant] Asus Fan Xpert 2 vs. the dust
When I was deciding on a motherboard for my Haswell rig, one of the things that I looked at was automatic fan controlling capabilities. I has a hardware fan controller bay but it was automatic. And it was a cable hell. Asus boards were on top of that chart with their "mature" Fan Xpert 2 software. So I settled for the Asus Maximus VI Hero motherboard.
Since then I had been using the Fan Xpert 2 software to control the fans of my PC. It currently controls the two CPU fans, 180mm two bottom intakes, 120mm top exhaust and 120mm back intake. (Yes, it's a weird fan setup but that's by Silverstone Raven RV03 case's design).
Anyways, one of the cool feature of this software is that it can completely turn off the case fans when the CPU temps are low enough. (Basically when the CPU is idling.) But it doesn't turn off the CPU fans completely. Must be a safely feature.
I think this feature is causing the dust to pile up inside the case. Basically, when the case fans are not running, the airflow inside the case is governed by the CPU fans and the GPU fans. Since the positive air pressure is not maintained (by making intake fans' CFM > exhaust fans' CFM) this causes air to sneak in from places that you don't want them to sneak in from. Air doesn't just come in alone - it comes with dust. Dust doesn't come in from the holes where intake fans are installed because they are properly filtered. It's the other gaps in the chassis that let the dust in. There is no way to prevent dust from sneaking in through those gaps except for creating a positive air pressure.
So I've changed how the Fan Xpert 2 controls the fan speeds. I don't let the intakes completely come to a halt anymore. I can stop the top exhaust fan completely because it is an exhaust fan.
You can see the fan speed graphs in the following two screenshots. (click on the images for a clearer, larger image)I should have cleaned the case internals but it is a tedious thing to do. I don't have time nor the motivation. Plus, I don't want to arouse the dust inside the apartment because of the baby. At least now the dust problem will be controlled. I will probably clean up the internals next time I upgrade some component inside the case. But it isn't happening in the foreseeable future.
Wednesday, June 19, 2013
Bought a couple of Silverstone F122 magnetic fan filters
Thursday, May 30, 2013
Dust busting!
So I'm finally set for cleaning up the inside of the PC chassis. I will also be reseating the HSF while I'm at it. All this was because of this post. I’m not sure if the cooler itself is the culprit, so this is to check that. If I manage to drop the max delta temps of the CPU to 50C after reseating and cleanup up, then I would keep the current cooler. Else, I might have to look for a new cooler.
But first things first. I have to start from the outside. From the things that I can see. So I decided to clean up the fan filters for the intake fans of the case. There were little dust on the first front fan filters. But there was a lot of dust on the bottom ones. A LOT!
The one on the left is the filter for the intake of the PSU fan. The one on the right is the filter for the two 180mm air penetrator fans.
I washed them up and fitted back and ran Prime95 for 20 minutes. Well, I didn't really see a noticeable drop in temps, but who cares? At least I feel it is running cooler now. That's what matters. What your mind feels is what matters.
I was planning to do the full clean up job today, but it got late. Maybe in the weekend. At least the PC won't suffocate during that time.


