Pages

Showing posts with label Guide. Show all posts
Showing posts with label Guide. Show all posts

Thursday, June 20, 2013

Choosing a proper graphics card for your gaming PC

The most critical part of a gaming PC is the graphics card. Graphics card prices range up to $1000 but that does not mean you have to save $1000 to get a good gaming experience. As with everything, at the lower scale of the spectrum, you are getting very bad performance (only slightly better than integrated solutions from Intel and AMD) and at the higher scale of the spectrum, you are getting diminishing returns. Midrange is where the sweet spot lies for most people. I said "for most people" because it is not always the truth. Sometimes you have to bend the rules and go for the absolute highest end cards.
 

AMD vs. NVidia - which one is better?

This is a sensitive matter. You cannot go wrong with either brand. Here's a comparison between the two, and I suggest that you match up your requirements with those and see which one suits you best.

Advantages of going with AMD

  • Gives better performance for the money you spend. (Might not be true in some parts of the world.
  • You get an amazing free games bundle with the card.
  • Has less performance drop when Anti-Aliasing is enabled/increased the level as well as resolution is increased.
  • All next generation consoles are using AMD GPUs, and the games will probably be more optimized for AMD's GCN architecture. This is just an assumption.
  • Usually overclocks a bit better than NVidia cards.
  • Has much better general purpose compute performance.
 
Advantages of going with NVidia
  • SLI works much, much better than Crossfire (at least as of now)
  • Ability to overclock the Pixel Refresh Rate of your display (how far your can overclock, depends on your display. I've managed to increase it from 60Hz to 69Hz on my Iiyama 27" display.)
  • Has a little bit better power efficiency.
  • People believe that NVidia drivers are usually more stable. But both companies put out buggy drivers every now and then.
  • GeForce Experience service, which automatically sets the graphics settings in each game for the best gameplay experience. On top of that, you are getting a cool feature called Shadow Play in a few days.

Wednesday, June 19, 2013

Want to overclock your CPU? Here are some tips to make it stable.

Remember those days when overclocking the CPU was considered dangerous and only a few people would even attempt it, and those people were treated like gods? Not anymore. Anyone can overclock their CPU if the CPU is overclockable and necessary hardware is available. Getting a modest overclock is easy, but if you are trying to squeeze all that extra juice from your CPU, you might need more than just luck.

Overclocking is not dangerous if properly done. Know your limits and obey by those limits. For example, don't insert a lot of volts to the CPU because it will damage the CPU. Keep it within the manufacturer recommended/commonly accepted volts for your particular CPU. Also be wary of the temps of the CPU as well as other components like VRM heat sinks of the motherboard.

Here are some tips.

1) Prepare a separate environment for overclocking if possible. If you have a spare drive lying around, install a free copy of Windows in it and don't install anything else - not even Windows updates or driver updates. Why this is important is because when your OS crashes while stress testing because your overclock is not stable, it can corrupt the files and settings and that alone can give a BSOD when you stress test with different settings the net time. You might think the CPU is unstable, but in reality it could be a corrupted driver or corrupted software that is running in the background.

2) Stress test for a couple of hours at stock settings. This will rule out any issues that might be present in the original hardware. No point trying to overclocking broken hardware. You'll only waste your "precious" time. Running Prime95's blend test should do the trick.

3) Don't overclock your RAM at the same time. Overclock only one component at a time, otherwise you won't know the culprit of the instability if you discover any. Overclocking RAM doesn't give any tangible benefits anyways. You will get better performance by overclocking the CPU. So, if you have high speed RAM (i.e. faster than 1600MHz), I would suggest that you drop the speed to 1600MHz CL9 timings. That would rule out the memory being the culprit of a crash. This is not needed, but just to be sure

4) Make a target. The target should not be in terms of clock speed, but in terms of max CPU temperature or max Vcore, whichever is reached first. For example, max Vcore = 1.4V and max CPU Temp = 85C. First, try Vcore = 1.4V at stock clock speed and run a stress test while monitoring CPU temperature. If you are below 85C, then you can simply try increasing the CPU clock speed. If you hit 85C, then stop stress testing and lower the CPU Vcore until your max temps are below 85C.

However, please note that when you increase the clock speed, the temps would increase a bit more even without increasing the Vcore. So try to stop about 5C below your suggested max CPU temps (i.e. 80C) to give some room for the temps to increase due to clock increase. Now that you have found your max voltage, it is time to increase the clock speed.

5) Be patient. Don't try to rush out thing. If you know that the CPU model you have usually overclocks to, say, 4GHz undoubtedly (all the current generation CPUs do), that would be a good place to start. You don't have to start from the stock speeds. That's not necessary. However, only increase clock speeds one step at a time.

For example, when it comes to Intel, the only way to effectively increase the clock speed is by raising the multiplier. Increase the multiplier one step at a time. That means, if you were starting from 4GHz, which means the multiplier was at 40x, increase to 41x, then 42x and likewise. At each step, stress test for like 30 minutes of Prime95's blend test. That should be enough for the intermediate stress tests. Once you find the maximum overclock, stress test for 24hrs (at least 12hrs) to make sure that is completely stable. If the stress test fails while doing the extensive stress tests, you'll have to drop the multiplier by one level. Then it is 24hrs of stress testing again. (Overclocking takes times. Don't rush it.)

6) Now that you (hopefully) found out your max CPU clock, you can revert to the original RAM settings or even try to overclock it. Remember that when you overclock your RAM, you might have to increase the VTT (memory controller voltage) to make it stable.

7) If you want to overclock further and you were limited by temperature, it is time to invest in a better cooler.

8) If you are having some particular issues, such as crashes at idle, take a look at this thread.

Those were some common guidelines and all that they do is make your life easier, even though at first it might seem like time wasters (preparing a separate environment just for overclocking, for example).

There are more extensive instructions on the forums such as Overclock.net, Techpowerup.com and XtremeSystems.org so read the guides posted there, ask questions and participate. You will learn a lot by doing that.

Monday, February 18, 2013

Send as SMS if you know iMessage is going to fail.

I love iMessage on the iPhone. I get instant delivery notifications, not as a new SMS alert but right besides the message. I can see if the person I sent the message has started replying to the message. An above all, it is free is you are sending messages to iPhones - since your data bill is - well, generally - fixed.

But there is one problem. If I got a message from a contact that uses an iPhone (i.e. the phone associated with that number is set as an "iPhone" instead of generic "mobile") it would always try to send the message as an iMessage. The recipient might not have data connectivity (there are people who buy iPhones without unlimited fixed data plan to save big bucks on their monthly subscription fee) and iMessage might not actually work. There is a timeout period in iMessage, after which the message will be sent as a regular SMS. The timeout period can be too long.

If you know that the recipient doesn't have Internet connectivity, you can simply send the message as a regular message by tapping and holding the message and selecting "Send as SMS".

It's such a small thing, but I didn't know you could do this until recently. Shame on me. But shame on you if you say that didn't know about this after reading this post. ;)

Thursday, February 14, 2013

How to improve/restore your Samsung 840 Series SSD’s performance

Remember that I bought a Samsung 840 series 250GB SSD about a month ago? Remember also that I told you I would be closely monitoring the degradation? This is the report after a month of moderate use.
 
On a fresh Windows 8 Pro x64 installation, the Windows Experience Index rated the SSD at a score of 8.1. But over the past month, I installed a lot of applications and huge games and now the SSD is 30% full. (Yeah, just 30%!) Once even I mistakenly copied my entire iTunes music collection to the SSD. Then I downloaded a whole 10GB file to the SSD without knowing that it was being downloaded into the SSD. I also did not do any of the space-saving tricks discussed here either. I'm using the default temporary folders. However, I do not let those temporary folders to fill up. Everyday at 10PM, a scheduled CCleaner cleanup job gets executed and all the temporary files get purged.
 
2013-02-13_23-37-41

The Windows Experience Index score for the SSD quickly dropped to 7.9 after a couple of weeks. I wasn't happy about it because that's what I got with my old SSD as well. I waited a week or so hoping that the original performance would be automatically restored, but it didn't happen. I felt as if I was cheated.
 
The SSD comes with a maintenance / management tool called the Samsung SSD Magician.
 
2013-02-13_23-35-08
 
You can perform various tasks in it.
  • Benchmarking (Sequential read/write speeds + IOPS)
  • Performance Optimization (garbage collection?)
  • Data migrating (cloning from a old drive)
  • Secure erasing (resetting the bits either to start fresh - kinda like a manual trim, if you are going to sell the drive.)
  • Changing the amount of default over provisioning (how much space is reserved for wear leveling)
  • Optimizing the OS settings to get the best out of the SSD (things like disabling indexing service and hibernation)
  • Firmware update

I'm not actually sure what Performance Optimization does, perhaps some sort of garbage collection, but that is what we are interested in. Last night I ran it to see if I can get back the score of 8.1 in Windows Experience Index. It didn't take long. It originally predicted a running time of 6 minutes, but it actually finished within a minute. Thus I wasn't expecting any miracles. But that's what I got. A miracle.

Sunday, November 25, 2012

Things you can do to lower the power consumption of your PC.

If you are someone who keeps your PC running 24/7 for whatever reason, you should be concerned about how much power the PC is drawing. A PC that runs 24/7 will definitely show its presence in your monthly power bill. A typical PC would draw about 60W at idle but a high-end, all-purpose PC would draw like 100W or even more. That's when doing nothing at all. And that too, without the monitor being turned on.

You could build a pretty power efficient, but very capable PC if you did some research at the time of building it. You don’t really have to spend much money either. Only choosing the components carefully will suffice.

For example,
  • buying a PSU that suits your PC, instead of going overkill
  • buying a mini-ITX or micro-ATX motherboard instead of going overboard with and ATX motherboard with all the features you can possibly get
  • buying 2 sticks of low voltage RAM instead of 4 sticks of regular RAM
etc...

But not all hope is lost. There are still a few things you can do to lower your PCs power consumption.

Building a low power 24/7 server + gaming rig from the scratch.

If you are one of those people who want to run your high-end gaming PC as a home server as well, then you should be concerned about the power draw of the PC. In the previous blog post, I discussed about things that you can do to lower the power consumption of your existing PC. Since you have already bought the hardware, most of them were software tweaks.

But if you have not yet bought the hardware, we can do a much better job. You can of course apply the same software tweaks to this build as well. I thought the previous article was too long, so I will try to be brief on this one. (But alas, I managed to make it even longer. Sorry for that.)

Please note that I would not be talking about peripheral devices. There is too much to cover and that is way out of scope for this article. I would not even cover displays, because the main target of this article is to build a PC that would also serve as a server while consuming least power doing so - which means, you can simply turn off the display when you do not need it. Further, I would not talk about the chassis either, because it doesn't directly affect power consumption of the PC.


CPU

Buy an Intel IvyBridge CPU. Since we are building a gaming PC, it would be beneficial to buy an unlocked CPU so that you can overclock it. Depending on what you wanna do with your PC, you can either buy the Core i5 3570K or the Core i7 3770K. If gaming is the soul purpose, then go with the i5. If you do some video editing, transcoding and rendering, the Core i7 would be the better choice. "AMD" and "low power consumption" don't go well together these days - (no) thanks to Bulldozer.

Wednesday, May 9, 2012

Overclocking the Intel Core i7 2600K with ASRock Z68 Extreme4

BX80623I72600KThere are few important things to know about overclocking your Sandybridge CPU.
 

BCLK:

Unlike the previous generation CPUs, with Sandybridge CPUs you don't have two parameters to change  when increasing the clock speed.
Clock speed = BCLK x Multiplier
Sandybridge CPUs have a default BCLK of 100MHz. You cannot increase it more than few MHz before the system becomes unstable. Some chips are capable of 103MHz or more, but most chip + motherboard
combinations don't like going above 100MHz at all. So the easier way to overclock your SB CPU is by increasing the multiplier. For that, you need to buy an unlocked CPU - denoted by the letter K at the end of the model name (e.g. 2600K)
 
Related Posts Plugin for WordPress, Blogger...