Installation Experience SG09

My new case, the Silverstone SG09 arrived on Saturday, August 2. I was too busy in the weekend that I could not play with it until late Sunday night. Actually, it was almost near midnight when I opened the packaging to see what is was like.

I did not plan to transfer all the components to the new case on the same day. But that is what actually happened. I had to all of the work in the kitchen otherwise the baby would have woken up to the noise.

Starting of the transfer of components

I first removed all the components that has to go in the new case, and placed them on the floor. Then I put the old case aside and brought the new case in.

Removal of the side panels was not painful despite having 6 screws to deal with. This case has a weird side panel setup. One of the side panels is actually half a panel and the other one is one and a half of a panel, plus the top area. I am not sure why they went with this design. I would not call this an elegant way to fix whatever design problem they originally had. But this could be the optimal fix because the newer SG10 case carries the identical design philosophy.

Installation of the PSU

At the first glance, I felt that the PSU was the one that should go in. (You will see that this was not the way to do it.) It does not mount itself onto the case. First a drawer like cage had to be removed from the case and the PSU had to be installed onto this cage. After that, you have to insert the unit into the PSU mounting hole. It actually went in quite smoothly.

Bought my new case for the SFF build

 

Now that I have finally found a buyer for my old case, it was now time to search for a good deal on a small case. I had been getting ready to buy one particular case: the Silverstone Sugo SG10. It is just the perfect case for the job; very small but supports Micro ATX boards and decent sized CPU coolers. I actually had bought all of the parts that I planned to put inside it and had been using them inside the old case until now.

• The CPU cooler is the Silverstone HE01 which is a perfect fit for this case. (link to article)
• The motherboard is the Maximus VII Gene which is pretty much the highest end Micro ATX board you can buy. (link to article)
• The PSU is a 80Plus Gold rated Corsair HX650 which is modular and a modular PSU is essential to be used with this case. (link to article)

The case was the last piece of the puzzle. And that last piece is just a matter of finding a store that sold it at a reasonable price. (Well, it is not the absolute last piece, because I want to buy at least a GXT 870 when they come out to replace my aging GTX 670.)